The July 2018 LiDAR data collection over the Kilauea Summit and the Lower East Rift Zone was conducted by the US Army Cold Regions Research & Engineering Lab (CRREL), The University of Houston and the USGS. Funding was provided by the State of Hawaii and the Federal Emergency Management Agency (FEMA). The system utilized was an R44 helicopter based pod which uses a Riegl VQ580i full waveform laser scanner. Total of 9 flights over the course of 5 days (July 8 - 12, 2018). This survey covers portions of Hawaii Volcano National Park on the Big Island of Hawaii as Kilauea volcano continues to erupt in Summer, 2018. The survey area covers approximately 122.4 km2. Dataset obtained from the USGS Kilauea LiDAR website. Please refer to that site for additional information.
Version Note: An initial version of this dataset, available from OpenTopography between July 23rd and 27th, 2018, had low classified ground point density due to a processing error. An updated version of the dataset (v.2), reprocessed by the US Army CRREL, was published by OpenTopography on July 30th, 2018 at 19:00 MDT.
Any use of this data should acknowledge all parties involved in collection, processing, and funding. Cite as follows:
USGS (2018b): Kilauea Volcano, HI July 2018 Acquisition airborne lidar survey. U.S. Geological Survey (USGS) in collaboration with the State of Hawaii, Federal Emergency Management Agency, Cold Regions Research and Engineering Laboratory, and the National Center for Airborne Laser Mapping, distributed by OpenTopography.
|Class 1 - Unclassified||942,169,281|
|Class 2 - Ground||1,155,479,617|
|Class 7 - Low Point (noise)||72,593,764|